Drill Sharpening Service
I take the very greatest care in sharpening your drill bits, ensuring they bite cleanly and efficiently every time.
To get your drills performing like new, reach out to Jerry’s Sharpening Services in Shropshire today
Highly Experienced
DRILL BIT SHARPENING
Drills are sharpened using the internationally recognised Tormek Drill
Sharpening equipment. The optimal clearance angle can be set to7, 9,11 or 14
degrees with the point angle set to 90 to 150 degrees according to the drill size
and type of material to be drilled. Water cooling eliminates overheating and
micro cracks.
The drill is ground with a four facet point, which very good cutting
performance. The chisel edge gets a point instead of being almost flat as on
many standard drills. A four facet point will not walk and the thrust force
required is considerably reduced. It generates less heat and the life of the drill is
therefore prolonged. The drill will bore a round, straight hole,which is not
larger than the drill diameter.
This service eliminates the disposal of many perfectly usable drills that
otherwise joins the throw away society.
Keep Your Drilling Perfectly Precise
Do you run a construction firm or workshop? You need to ensure your drill bits are as sharp as possible to achieve clean and accurate holes, every time. The better the drilling, the higher the quality of your work. Make sure your equipment is in perfect working order by letting me regularly sharpen your drill bits.
I also offer the same expert service to carpenters, metalworkers, and DIY enthusiasts alike.